(209) 465-4377 Call for a Free Quote!

Tile Roofing

Your local, certified roofing contractor

Phoenix Construction Group is a Certified Boral Tile Roofing Contractor

Get Started

Get a Complimentary Quote Today

Request a complimentary quote today
by calling us at (209) 465-4377 or filling
out the form below.

Thank you for your interest, we will contact you shortly.×

Oops! Some went wrong... Your submission did not go through :-(×

By clicking Submit I agree to be contacted by Phoenix Construction Group even if I'm on a Do Not Call list. In addition by clicking the check box I consent to be called back from Phoenix Construction Group at the phone number provided, including cellular, which may be generated from an automated phone dialing system. You are not required to provide this consent to make a purchase from us.

Roof Tile Systems

According to Oak Ridge National Laboratory, an independent testing agency, a family in a typical single family house with a Boral Energy Efficient Cool Roof System could save up to 22% per year on heating and cooling costs compared to the standard composition asphalt shingle roof.* This house could save an average of $15 to $20 per month immediately compared to a standard asphalt shingle roof and as energy rates rise year over year, your savings could increase as well and could amount up to $20,000 over 30 years.**

Boral offers a range of cool roof tiles in various profiles to reflect the sun’s heat. Also, the air space between the tiles and roof deck provide ventilation with Boral’s roof materials and products to make an energy saving roof to cool the building during hot summer days and provide better protection against leaks.

A house with a Boral Energy Efficient Cool Roof System is more comfortable to live in while saving energy costs to keep the building cool and can last longer than traditional roof construction.

Tile Roof Repairs

Phoenix Roofing is your local tile roofing expert! Tile roofs are considered a higher end roof system, but many roofing contractors do not explain to the customer that their new tile roof will need to be maintained throughout its life span or else the customer could end up with a tile roof leak. Some of the most common tile roof problems we see are:

Probably the most common and most costly cause of tile roof leaks is from a blocked roof valley. Tile valleys (if installed by a knowledgeable roofing contractor) should have a valley metal under the roof tile. Many tile roofing contractors install the valley tiles too tight together where the valley tiles are butted up to each other. This causes dirt, dust, and debris to be collected in the valley causing a damming effect. After a period this dam forces water to start traveling sideways along the battens. Before long, the water deteriorates through the roofing felt and begins seeping through the plywood roof deck. The water then often travels along roof rafters inside your attic and then drops down onto the sheetrock on the topside of the ceiling. Therefore, it’s not uncommon for us to locate ceiling leaks up to fifteen feet away from where the water is actually coming in through the roof.

Be sure to take a look at our video below which demonstrates this common problem and how we correct it.

So we have here your typical valley when you get all the backup debris. All kinds of debris backed up and what happens saturating the felt paper and it eventually finds its way into the roofing system and into your home.

If you look next door you'll see what the valley used to look like. That's the next door neighbor's but all the valleys are pretty much cut the same; they're butted up tight which traps debris.

What we're gonna do here is we're gonna open up the valleys. We're gonna cut the tiles a little wider; expose some of this valley and allow the water to drain properly so it doesn't stop up the debris.